We recommend that you use the primary DHCP server address that You can configure DHCP on a per-interface or per-WLAN basis. Intra controller, inter controller, and inter-subnet client roaming.Įxternal DHCP servers can support DHCPv6. The operating system is designed to appear as a DHCP Relay to the network and as a DHCP server to clients with industry-standardĮxternal DHCP servers that support DHCP Relay, which means that each controller appears as a DHCP Relay agent to the DHCP server and as a DHCP server at the virtual IP address to wireless clients.īecause the controller captures the client IP address that is obtained from a DHCP server, it maintains the same IP address for that client during VRF is not supported in the internal DHCP servers.ĭHCPv6 is not supported in the internal DHCP servers. Wired guest clients are always on a Layer 2 network connected to a local or foreign controller. Resolve any IP address conflicts, clients must release their existing IP address and request a new one. As a result, multiple clients can be assigned to the same IP address. When clients use the internal DHCP server of the controller, IP addresses are not preserved across reboots. The management interface IP address of the controller, such as local subnet broadcast, Domain Name System (DNS), or priming.Īlso, an internal DHCP server can serve only wireless clients, not wired clients. Therefore, the access point must use an alternative method to locate When you want to use the internal DHCP server, ensure that you configure SVI for client VLAN and set the IPĭHCP option 43 is not supported on the internal server. Only lightweight access pointsĪre supported. The internal server provides DHCP addresses to wireless clients, direct-connect APs, and DHCP requests that are relayed from APs.
The wireless network generally contains a maximum of 10 APs or less, with the APs on the same IP subnet as the controller. This server is typically used in branch offices that do not already have a DHCP server. The controllers contain an internal DHCP server. Two types of DHCP servers are available-internal and external. You can configure WLANs to use the same or different Dynamic Host Configuration Protocol (DHCP) servers or no DHCP server. Information About Dynamic Host Configuration Protocol
WeChat Authentication Based Internet Access.
Client Traffic Forwarding Configurations.Connecting Mesh Access Points to the Network.
0 kommentar(er)
